Kernel Panic Error;
"BUG: unable to handle kernel NULL pointer dereference at 00000030"
We are getting this fairly regularly (once a month or so).
The moth board is a Jetway J7F2WE1G5D (1.5GHz Via CPU).
Do you have any suggestions.
The BIOS is set to optimized defaults.
I can send a screen shot?
Thank you in advance.
Kernel Panic
Moderator: Securepoint
Hi,
please turn off EHCI-Mode for the integrated USB-Controller.
http://www.securepoint.de/support/topic.php?id=563
Use another DIMM-Module:
With ECC: Kingston KVR533D2E4/1G
NonECC:
Hynix HYMP512U64CP8
The Mainboard is not the same as the CV702A RC100 mainboard.
please turn off EHCI-Mode for the integrated USB-Controller.
http://www.securepoint.de/support/topic.php?id=563
Use another DIMM-Module:
With ECC: Kingston KVR533D2E4/1G
NonECC:
Hynix HYMP512U64CP8
The Mainboard is not the same as the CV702A RC100 mainboard.
Zuletzt geändert von Mario am Mi 17.06.2009, 11:37, insgesamt 1-mal geändert.
Mit freundlichen Grüßen
Mario Rhein
Support
Tel. 04131/2401-0
Fax 04131/2401-50
Securepoint GmbH
Blecker Landstr. 28
D-21337 Lüneburg
https://www.securepoint.de
Mario Rhein
Support
Tel. 04131/2401-0
Fax 04131/2401-50
Securepoint GmbH
Blecker Landstr. 28
D-21337 Lüneburg
https://www.securepoint.de
Hello, thank you for all your comments.
I will try changing the settings in the BIOS as suggested.
We do have an identical unit which is the slave. It does not have the same problem but it is never used.
I might try swapping over the roles.
Sorry, I thought it was the same mainboard.
Thanks
Andy
I will try changing the settings in the BIOS as suggested.
We do have an identical unit which is the slave. It does not have the same problem but it is never used.
I might try swapping over the roles.
Sorry, I thought it was the same mainboard.
Thanks
Andy